① 🧼 Clean the Surface
Clean and dry the inside of the eyewear lens.
storefront 🚚 FREE SHIPPING ON ORDERS OVER $69
storefront 🔥 LIMITED-TIME DEALS — UP TO 30% OFF
storefront 🔒 SAFE AND SECURE CHECKOUT EVERY TIME
Subtotal$0.00
Couldn't load pickup availability
Add selected optical power to compatible eyewear with removable inserts and no permanent adhesive.
Position the insert on a suitable inner lens surface, then check the fit before each use.
For books, menus and other near tasks, choose the reading (+) option in the power advised for your needs.
The half-moon design sits toward the lower lens area, leaving space above.
The full-size distance (−) insert is shown at pupil level; suitable positioning and fit matter.
Compare your available inner lens area with the reading insert’s shape before ordering.
The distance style needs enough smooth, relatively flat inner lens space; curved or small surfaces may not fit.
Use clean water to apply the insert, then adjust the position gently.
Clean and dry the inside of the eyewear lens.
Wet the suitable inner lens surface with clean water.
Place the insert on the wet surface and adjust it for the intended viewing area.
Gently press from the center outward to release trapped air and excess water. Blot around the edges with a clean, soft cloth.
A flexible optical insert for compatible eyewear, designed to be removed, cleaned and reapplied.
Reusable stick-on optical inserts for compatible glasses and sunglasses.
Clean-water application to a suitable inner lens surface. No permanent adhesive.
Reading / Presbyopia (+) and Distance / Nearsighted (−).
Reading: +1.00D to +6.00D. Distance: −1.00D to −6.00D. Available increments are shown in the strength selector.
Half-moon shape, approximately 3.1 × 1.8 cm.
Full-size shape, approximately 4.8 × 2.9 cm.
Spherical power (SPH) only. No astigmatism (CYL) or prism correction; custom prescriptions are not offered.
Smooth, relatively flat inner lens surfaces with enough space. Fit varies with curvature, size and lens coating.
Remove gently, rinse and reapply. Replace inserts that are scratched, torn or deformed.
Practical answers about selection, fit and everyday care.
No. They are applied with clean water to a suitable smooth inner lens surface. They do not require permanent adhesive.
The listing offers Reading / Presbyopia (+) and Distance / Nearsighted (−) types. Have your eye-care professional confirm the appropriate power for your needs and the eyewear you intend to use. Do not assume an existing spectacle prescription is automatically the correct add-on power.
The strength selection shows the power magnitude. Lens Type determines the sign: Reading (+) or Distance (−). For example, the Reading / 2.00D option denotes +2.00D; the Distance / 2.00D option denotes −2.00D. This explains the option labels, not which power you should choose.
Do not assume an insert can simply be added to your current prescription. Ask your eye-care professional to confirm the combined optical effect, suitable positioning and lens compatibility before use.
No. The inner surface must be sufficiently smooth and relatively flat, with enough space for the insert. Highly curved, textured or small lens surfaces may be unsuitable. Lens coatings can also affect compatibility.
This listing has Lens Type and Lens Strength selections, without separate left- and right-eye selectors. Confirm how the supplied set is configured before ordering if you need different powers for each eye.
No. These are spherical-power (SPH) inserts only. They do not provide CYL or prism correction and are not a substitute for a custom prescription.
Yes. Remove them gently, rinse with clean water and reapply to compatible eyewear. Check their condition before use and replace damaged inserts.
Remove and rinse the insert, wet the surface again, reposition it and gently press outward from the center to release trapped air and excess water.
Rinse with clean water. If needed, use a small amount of mild dish soap and rinse thoroughly. Blot carefully with a clean, soft cloth or allow to air dry. Avoid rubbing or scrubbing the optical surface with a dry cloth.
Do not rely on these removable inserts for driving, diving or other safety-critical activities without appropriate professional confirmation of optical suitability, fit and protection requirements.
No. They attach to the inner surface of compatible eyewear lenses. Do not place them on your eyes.
