🛞 2-in-1 TPMS Relearn Tool & Digital Tire Pressure Gauge for GM
🛞 2-in-1 TPMS Relearn Tool & Digital Tire Pressure Gauge for GM
BUNDLE & SAVE
Couldn't load pickup availability
🛞 2-in-1 TPMS Relearn Tool & Digital Tire Pressure Gauge for GM
Rotated Your Tires?
Finish The Job.
Relearn compatible GM TPMS sensors and check tire pressure with one handheld tool built for the DIY garage.

Relearn & Pressure Check Make More Sense In Motion.

Keep Relearn & Pressure Checks In The Same Hand.
Instead of keeping a separate TPMS activation tool and digital pressure gauge in the garage, the TPA01 combines both functions into one handheld unit.

Help The Vehicle Learn Where Each Sensor Moved.
After tire rotation on a supported vehicle, enter TPMS learn mode, hold the straight antenna near the tire valve and activate each functioning sensor in the required wheel order.

Check. Read. Go.
Seal the angled metal nozzle onto the tire valve to get a digital pressure reading, then choose the unit that matches the way you normally work.
The gauge only measures pressure. It does not inflate the tire. Always follow the pressure specification for your vehicle.

Follow The Vehicle's Sequence — One Tire At A Time.
Install a fresh 9V battery, place the vehicle into TPMS learn mode, then activate the sensors in the wheel order required by your vehicle.
Follow the procedure in your owner's manual.
Work around the vehicle in the specified wheel sequence.
Continue only after the vehicle confirms each position.

Compatible GM Vehicles Only — Not Every Model.
The supplier lists selected 2006–2022 GM vehicles using compatible 315 / 433 MHz OEM TPMS sensors.
That includes selected Chevrolet, Buick, GMC, Cadillac and Opel applications, but exact compatibility varies by model, year and sensor type.
Relearn also requires functioning, correctly programmed sensors. This tool does not program a new sensor ID.
Relearn Tool ≠ Sensor Programmer.

Add One Fresh 9V Battery.
The tool requires one 9V battery for operation.
The current product listing specifies that the battery is not included, so keep one ready before your first relearn or pressure check.
Two Tire-Care Functions Without Two Separate Tools.
Activate compatible functioning GM sensors while the vehicle is in its supported relearn mode.
Check tire pressure directly at the valve using the angled metal nozzle.
Switch between PSI, BAR, kPa and kg/cm².
Keep relearn and pressure-check functions together in one handheld tool.
Intended for selected compatible GM vehicles and matching OEM TPMS sensor systems.
Operates from one replaceable 9V battery.
Know The Vehicle Before You Reach For The Tool.
Compatibility Matters More Than The Logo On The Grille.
Does this work with every GM vehicle?
No. The supplier lists selected 2006–2022 GM vehicles using compatible 315 / 433 MHz OEM TPMS sensors. Confirm your exact model, year and sensor system before ordering.
What happens after a tire rotation?
Some supported vehicles require a TPMS relearn so the vehicle can associate each functioning sensor with its new wheel position. Follow your vehicle's owner instructions.
What wheel order should I follow?
A common supported GM order is left front, right front, right rear, then left rear. Vehicle-specific instructions always take priority.
Can this program a brand-new TPMS sensor?
No. This is a relearn / activation tool, not a sensor-ID programmer. Replacement sensors must already be compatible and correctly programmed.
Can it fix a damaged sensor?
No. It cannot repair failed sensors, damaged sensors or tire leaks.
Can it measure tire pressure?
Yes. Use the angled pressure nozzle on the tire valve to read pressure digitally.
Which pressure units are available?
The current product supports PSI, BAR, kPa and kg/cm².
Does it inflate the tire?
No. The tool measures pressure only. Use the tire pressure recommended by your vehicle manufacturer.
What battery does it need?
One 9V battery is required. The current listing states that the battery is not included.
Is it suitable for external TPMS kits or heavy trucks?
The current listing says it is not intended for external TPMS systems or heavy trucks with more than four tires.
Relearn The Sensors.
Check The Pressure.
Keep One Tool In Reach.
For compatible GM vehicles, keep the two tire-care jobs you actually need after rotations and routine checks inside one handheld tool.
Check Your Vehicle Fitment →Compatibility varies by vehicle year, model and TPMS sensor type. Relearn requires functioning, correctly programmed sensors. This tool does not program sensor IDs, repair TPMS sensors, inflate tires or fix leaks. Always follow your vehicle owner's manual and recommended tire pressure.
