⚡ KAIWEETS KT303P Circuit Breaker Finder Kit with GFCI Outlet Tester & Adapters
⚡ KAIWEETS KT303P Circuit Breaker Finder Kit with GFCI Outlet Tester & Adapters
BUNDLE & SAVE
Couldn't load pickup availability
⚡ KAIWEETS KT303P Circuit Breaker Finder Kit with GFCI Outlet Tester & Adapters
KAIWEETS · Circuit Breaker Finder Kit
Which breaker controls this outlet?
When the panel directory is blank or out of date, use the plug-in transmitter and handheld receiver to match an outlet to its breaker.
At the breaker panel
Scan once to learn. Scan again to locate.
Plug the transmitter into a correctly wired outlet and reset the receiver away from the panel as directed in the manual. With the panel cover in place, scan all the breakers once so the receiver can learn the signals. On the second pass, a steady tone and a full signal bar indicate the match.
At the outlet
Read the wiring lights before testing GFCI
Match the transmitter’s lights to its printed legend to spot common wiring faults. When the lights indicate correct wiring, use the GFCI button to check whether compatible protection trips.
Non-contact voltage mode
Get an alert when AC voltage is detected
The receiver uses light and sound to flag nearby AC voltage. Before working on wiring, have a qualified electrician verify that the circuit is de-energized with properly rated test equipment.
Lighting circuits
Match a light fixture to its breaker
Use the screw-in light socket adapter with a compatible lamp holder. Follow the kit manual when fitting the adapter and tracing the circuit.
Three included adapters
Choose the adapter for the connection
The kit includes a three-to-two-prong adapter, a light socket adapter, and an alligator clip adapter. Have a qualified electrician handle connections to exposed wiring.
Zippered carrying case
Pack the kit together after the job
Keep the receiver, transmitter, and adapters in one case so everything is easy to find at the next panel.
The essentials
Product information
Model
KAIWEETS KT303P
Electrical system
For compatible 120 V AC circuits
Operating range
90–130 V AC, 50/60 Hz
Receiver power
Two AAA batteries
Before you test
Frequently asked questions
Why does the receiver signal at several breakers on the first pass?
It’s learning the panel’s signals. Finish the first scan, then use the second pass to locate the matching breaker.
What if the outlet lights show a wiring fault?
Stop testing and have a qualified electrician check the outlet.
Will a GFCI test interrupt power?
Yes. A successful trip cuts power to the protected circuit. Switch off devices on that circuit before running the test.
