Solar Outdoor Motion Sensor Alarm - Dog Barking & Gunshot Sound, Support Recording and Volume Adjustment, 130dB Noise with Flashing Light to Deter Raccoon, Deer, Skunk, Bear, Coyote
Solar Outdoor Motion Sensor Alarm - Dog Barking & Gunshot Sound, Support Recording and Volume Adjustment, 130dB Noise with Flashing Light to Deter Raccoon, Deer, Skunk, Bear, Coyote
BUNDLE & SAVE
Couldn't load pickup availability
-
Ordered
- - -
Order Ready
- - -
Delivered
Solar Outdoor Motion Sensor Alarm - Dog Barking & Gunshot Sound, Support Recording and Volume Adjustment, 130dB Noise with Flashing Light to Deter Raccoon, Deer, Skunk, Bear, Coyote
Let Motion Trigger The Warning Before You Walk Outside.
Place it near the outdoor areas you want to watch. When compatible movement enters the sensor zone, sound and flashing red LEDs can activate automatically to help discourage unwanted wildlife activity.
You Shouldn’t Have To Keep Going Outside To Check Every Noise.
Gardens, lawns, garbage areas, sheds and property edges can attract unwanted nighttime activity. A motion-triggered warning adds an automatic response in the areas you cannot watch every minute.
It Waits Quietly Until Movement Enters The Detection Area.
Instead of running continuously, the motion-based modes use the built-in sensor to watch the selected area and activate the configured sound and flashing LEDs when movement is detected.
The sensor monitors a forward-facing zone with a listed detection angle of up to approximately 120°.
Select a built-in warning sound or use your own recorded audio.
Six red LEDs add a visible warning when the configured alarm mode activates.
Choose The Warning Level That Makes Sense For Your Property.
Three volume levels let you adjust the alert rather than operating at maximum output all the time. The listed maximum sound output is up to approximately 130 dB.
Reduce or increase the alert to better suit installation distance and nearby surroundings.
Record up to approximately 20 seconds of your own warning audio.
Use the built-in warning audio when custom recording is not needed.
Sound safety: High-volume alarms can be extremely loud. Do not activate the unit close to people or animals' ears. Use the lowest practical volume around occupied areas.
Set It For The Hours When You Actually Need It.
Choose continuous motion monitoring, nighttime-only motion monitoring or a nighttime timed warning pattern depending on the area and activity you are trying to discourage.
Motion-triggered sound and flashing light can operate during both daytime and nighttime.
Motion-triggered operation is limited to darker conditions.
At night, the configured sound and flashing alert can repeat at approximately five-minute intervals.
Aim The Sensor At The Path—Not Just The Property.
Better placement can make a bigger difference than simply mounting the unit higher or louder. Face the sensor toward the path where movement is most likely to cross the detection area.
The listed sensing angle helps monitor a broad zone in front of the unit.
Listed motion detection distance is approximately 19.7–26.2 ft under suitable conditions.
Walk through the intended detection area and reposition the unit if activation begins too early, too late or misses the path.
Actual sensing distance can vary with installation height, temperature, target size and movement, angle, vegetation and other environmental conditions.
From Backyard Paths To Larger Outdoor Areas.
Use the alarm as an additional deterrent layer around outdoor spaces where wildlife activity is unwanted.
Two Charging Options Make Placement More Practical.
The top-mounted solar panel can recharge the internal battery when the unit receives suitable sunlight, while USB charging gives you a second option before setup or during extended low-sun periods.
Position the panel where it can receive useful sunlight rather than under dense shade or deep overhangs.
Recharge manually through the included cable when solar conditions are limited.
The listed internal battery is 3.7V / 1200mAh.
Control Modes, Volume And Recording From The Included Remote.
The supplied infrared remote provides convenient access to key controls after installation, while manual controls remain available on the unit itself.
Switch between the three operating patterns without changing the installation.
Adjust output to better suit the surroundings.
Record a custom warning message or sound up to the listed 20-second limit.
Mount It Outside Without Treating It Like An Indoor Gadget.
The housing is listed as IP55, helping make the unit more suitable for everyday outdoor installation around yards, gardens and similar spaces.
Designed to handle normal outdoor exposure when installed correctly.
Red LEDs add another deterrent cue when the selected operating mode activates.
Adjust key functions without repeatedly removing the unit from its mounting position.
IP55 does not mean the unit should be submerged. Install it securely and avoid locations where water can pool around charging connections or the housing.
Five Steps From The Box To A Working Detection Zone.
Charge the unit before first use so you can test the installation immediately.
Identify the path, entry point or outdoor zone where unwanted movement is most likely.
Face the front of the unit toward the expected movement path and keep useful sunlight available to the top panel.
Choose the operating pattern and start with a suitable sound level for the surroundings.
Test activation and adjust the mounting angle or location when needed.
The Useful Parts Work Together—Not One At A Time.
Motion-triggered modes can activate sound and light without you standing nearby.
Match the warning volume more closely to installation distance and surrounding activity.
Record your own short alert instead of relying only on preset sounds.
Flashing red LEDs give the activation an additional visible cue.
Solar charging supports outdoor use while USB provides a manual charging option.
Built for normal outdoor installation when mounted and used appropriately.
Product Specifications
Detection and deterrence performance can vary by placement, conditions and animal behavior, so use these specifications as setup guidance rather than a guaranteed coverage promise.
Detection distance can vary with temperature, installation height, vegetation, target movement and surrounding conditions. Solar charging also depends on available sunlight and panel placement.
Wildlife response varies by species, individual behavior, prior exposure, environment and placement. No electronic deterrent can guarantee that every animal will leave or stay away.
Frequently Asked Questions
Does the alarm run continuously?
Can I use it only at night?
Can I change the sound?
Can I lower the volume?
How far can the sensor detect movement?
Does it need direct sunlight?
Can I charge it without sunlight?
Is it waterproof?
Will it guarantee that deer, raccoons or other animals leave?
Where should I install it?
Motion Comes In. Sound And Light Respond.
Solar-assisted charging, adjustable audio, flashing LEDs and flexible operating modes combine in one outdoor sensor designed to help discourage unwanted wildlife activity around your property.
CHECK FEATURES & SPECIFICATIONS ↑
