🛠️ Stainless Steel Sewer Jetter Nozzle – 7-Jet 1/4" Quick Connect Drain Cleaner for Pressure Washers 💦
🛠️ Stainless Steel Sewer Jetter Nozzle – 7-Jet 1/4" Quick Connect Drain Cleaner for Pressure Washers 💦
BUNDLE & SAVE
Couldn't load pickup availability
🛠️ Stainless Steel Sewer Jetter Nozzle – 7-Jet 1/4" Quick Connect Drain Cleaner for Pressure Washers 💦
Stop Fighting Stubborn Clogs.
Get Deep Inside The Drain. 💦
Grease, sludge and stubborn debris can build up deep inside drain pipes. This stainless steel sewer jetter nozzle uses a 7-jet configuration to direct high-pressure water where it is needed. One forward jet helps break through blockages, while six rear jets help propel the nozzle forward and flush loosened debris back through the line.
The Toughest Buildup Isn't Always Easy To Reach.
Grease, sludge, leaves and accumulated debris can collect farther inside a drainage line. Cleaning only around the drain opening may not address buildup deeper in the pipe. A sewer jetter attachment directs water through a compatible hose to help clean the interior of the drain line.
High-pressure water helps break up accumulated residue inside compatible drain lines.
Forward and rear-facing water jets help loosen and flush debris.
Direct water flow into the pipe to help clear accumulated material.
One Forward Jet. Six Rear Jets. Two Cleaning Actions.
The nozzle's seven-jet arrangement combines a forward-facing outlet with six rear-facing outlets. The forward stream works on debris ahead, while the rear streams direct water backward to help flush loosened material and propel the nozzle through the pipe.
The front-facing water stream directs pressure toward debris and blockages ahead of the nozzle.
Six rear-facing streams help propel the nozzle forward while flushing loosened debris back through the pipe.
Compact Stainless Steel. Purpose-Built Jetting.
The stainless steel nozzle features a streamlined metal body, a forward outlet and six rear jet openings. Its compact construction connects to compatible sewer jetting hoses through the 1/4-inch quick-connect fitting. A practical attachment for drain maintenance and cleaning work.
Corrosion-resistant stainless steel construction for repeated cleaning applications.
1/4-inch connection designed for compatible sewer jetting hoses.
One front outlet and six rear outlets work together during pipe cleaning.
From Kitchen Drains To Outdoor Sewer Lines.
Drain cleaning jobs don't all happen in the same place. This jetter nozzle is listed for a range of indoor and outdoor drainage applications when used with a compatible pressure washer sewer jetting hose and suitable access.
A 1/4-Inch Quick Connect For Compatible Jetting Hoses.
The rear fitting uses a 1/4-inch quick-connect plug. Match it with a compatible pressure washer sewer jetting hose to create the connection. Always verify the fitting type and pressure rating of your hose and equipment before use.
Designed for compatible 1/4-inch quick-connect systems.
Connect to a suitable pressure washer sewer jetting hose.
Check the fitting is fully seated and locked before operating the equipment.
The nozzle is an attachment only. A pressure washer and compatible sewer jetting hose are not included.
Compact Dimensions. Easy To Handle.
The nozzle measures approximately 5.5 cm long and 2 cm in diameter. Its compact profile is designed to connect to a compatible jetting hose for access into suitable drain openings. Check your pipe access and hose compatibility before purchasing.
Approximately 5.5 cm or 2.16 inches.
Approximately 2 cm or 0.8 inches.
Seven Jets. One Compact Drain-Cleaning Attachment.
One forward jet and six rear jets for coordinated water flow.
Directs water toward debris and blockages ahead.
Help propel the nozzle and flush loosened debris backward.
Corrosion-resistant metal construction for regular cleaning tasks.
1/4-inch quick-connect compatibility for suitable hoses.
Designed for a variety of residential and commercial drain-cleaning tasks.
Connect. Check. Position. Clean.
Use the nozzle with a compatible pressure washer sewer jetting hose. Check the connection and follow the equipment manufacturer's operating instructions before beginning any drain-cleaning work.
Confirm the hose uses a matching 1/4-inch quick-connect fitting.
Attach the nozzle while the pressure washer is switched off and depressurized.
Insert the jetting assembly into the suitable drain access point as instructed by the equipment manufacturer.
Follow the pressure washer and hose operating instructions while maintaining safe control.
The Details At A Glance.
Powerful Water Requires Proper Handling.
This nozzle is designed for use with high-pressure drain-cleaning equipment. High-pressure water can cause serious injury if handled incorrectly. Always follow the pressure washer and hose manufacturer's safety instructions.
- Verify that the nozzle, hose and pressure washer are compatible and rated for the operating conditions.
- Switch off the equipment and fully release system pressure before attaching, disconnecting or inspecting the nozzle.
- Never point the nozzle toward people, animals or any part of the body.
- Wear appropriate eye protection, protective clothing and footwear.
- Check that the quick-connect fitting is properly locked before operating the system.
- Never operate the nozzle outside the pipe while water is being discharged.
- Do not exceed the pressure or temperature limits specified by the pressure washer and hose manufacturers.
- Inspect the hose, fitting and nozzle for damage before use.
- Do not use on fragile or damaged pipes unless the equipment and pipe manufacturers confirm that the application is suitable.
The product listing does not specify a maximum PSI or operating temperature. Confirm these limits with the supplier before connecting to your equipment.
A Few Questions Before Your Next Drain-Cleaning Job.
How many water jets does the nozzle have?
It features seven jets in total: one forward-facing jet and six rear-facing jets.
What does the forward jet do?
The forward jet directs water toward debris and blockages ahead of the nozzle to help break them apart.
What do the six rear jets do?
The six rear jets direct water backward. Their flow helps propel the nozzle forward through the pipe while flushing loosened debris back.
Is the nozzle made from stainless steel?
Yes. The product specifications list stainless steel construction, designed to resist rust and corrosion.
What connection does it use?
It uses a 1/4-inch quick-connect fitting. Check that your sewer jetting hose has a compatible mating connection before ordering.
Does it include a pressure washer?
No. The package includes one stainless steel sewer jetter nozzle. The pressure washer and compatible jetting hose must be purchased separately.
What is the nozzle's size?
It measures approximately 5.5 cm in length and 2 cm in body diameter.
What types of drains can it clean?
The product is listed for kitchen sinks, bathroom drains, floor drains, toilet drain lines, outdoor sewer pipes, storm drains and underground drainage lines, subject to suitable access and equipment compatibility.
Is it self-propelling?
The six rear-facing jets create backward water flow that helps propel the nozzle forward through compatible drain lines.
What is the maximum operating pressure?
The product listing does not specify a maximum PSI rating. Confirm the nozzle's operating limits with the supplier and make sure they match your pressure washer and hose.
Blast. Drive. Flush. Keep Drains Flowing. 💦
One forward jet. Six rear jets. A durable stainless steel body and a 1/4-inch quick-connect fitting. Add a dedicated sewer jetter nozzle to your compatible pressure washer drain-cleaning setup and tackle everyday pipe maintenance with a more targeted water-flow design.
EXPLORE THE 7-JET SEWER NOZZLE ↑
