❄️🚗 Windshield Wiper Anti-Freeze Stands – 2-Pack 3D Printed Wiper Lifters | Snow & Ice Parking Protection, Easy Tool-Free Setup
❄️🚗 Windshield Wiper Anti-Freeze Stands – 2-Pack 3D Printed Wiper Lifters | Snow & Ice Parking Protection, Easy Tool-Free Setup
BUNDLE & SAVE
Couldn't load pickup availability
❄️🚗 Windshield Wiper Anti-Freeze Stands – 2-Pack 3D Printed Wiper Lifters | Snow & Ice Parking Protection, Easy Tool-Free Setup
Don't Let Your Wipers Freeze to the Glass.
Waking up to wiper blades stuck against an icy windshield is frustrating. These compact anti-freeze stands lift the blades away from the glass while your vehicle is parked, helping reduce the contact that can cause frozen, stuck wipers.
Two compact supports designed for frosty overnight parking.
Frozen Blades Can Make a Cold Morning Worse.
Overnight moisture can freeze the rubber blade to the glass. Separating the wiper before ice forms helps reduce sticking and the strain of freeing a frozen blade.
Keep compatible blades separated from the windshield overnight.
Reduce the contact point where moisture can freeze around the rubber.
Prepare your wipers before a freezing night rather than after.
Lift. Place. Lower. Done.
The recessed top groove cradles the wiper arm, while the wider base rests on the windshield. Installation takes no tools and becomes part of your parking routine before freezing weather.
Gently raise the parked vehicle's compatible wiper arm.
Position the support on the glass beneath the wiper arm.
Rest the arm carefully in the top channel and check stability.
A Small Stand with a Thoughtful Shape.
Each support features a 3D-printed PLA body, a recessed upper groove and a wide polygonal base. The simple shape helps hold the wiper arm in an elevated position while parked.
Provides a resting channel for a compatible wiper arm.
Rigid printed construction with visible layered texture.
Creates a broader footprint to help position the stand on the glass.
Compact Size. Easy Winter Storage.
Measuring approximately 6 cm tall and 3 cm wide, the stands are compact enough to keep in your glovebox or door pocket between uses. Check the space beneath your wiper arm to confirm a suitable fit.
Approximate stand height.
Approximate stand width.
Keep the pair handy for cold-weather parking.
Two Stands. Three Color Choices.
Each pack includes two windshield wiper support stands for compatible front wiper arrangements. Choose the finish that suits your vehicle and keep the pair ready whenever freezing temperatures are expected.
A subtle, low-key finish for your car-care accessories.
A bright color that's easy to spot in your winter gear.
A clean, neutral alternative for everyday storage.
Everything at a Glance.
Frequently Asked Questions.
How do these wiper stands work?
They support compatible wiper arms above the windshield while the vehicle is parked, reducing direct contact between the rubber blades and icy glass.
How many stands are included?
Each pack contains two wiper supports.
Do I need any tools?
No tools are needed for the intended installation. Gently lift the wiper arm, place the stand beneath it and carefully lower the arm into the groove.
What are the stands made of?
The seller specifies 3D-printed PLA plastic with a rigid body and wide support base.
What sizes are the stands?
Each stand is approximately 6 cm (2.36 inches) tall and 3 cm (1.18 inches) wide.
Will they fit every vehicle?
Fit depends on the wiper-arm design and available clearance. Compare your vehicle's arrangement with the stand dimensions before use.
Can I drive with them installed?
No. They are intended for parked vehicles. Remove the supports before driving and check that both wipers operate normally.
Give Your Wipers a Little Breathing Room.
Make winter parking preparation simpler with a compact 2-pack of wiper support stands. Raise the blades off the glass, help reduce freezing contact and keep the pair ready for the next cold night.
Back To The Top ↑
